*USED* Big Dog Motorcycle EFI THROTTLE BODY w/all sensors and Hardware 2007-2011

Description: This is a USED FULLY FUNCTIONAL Big Dog Motorcycle EFI COMPLETE Throttle body with ALL sensors and hardware (except bolts to mount to INTAKE). If you were to buy the throttle body alone, with NO SENSORS or HARDWARE attached (bare), they are still available from Big Dog for $347.95, again, all the other sensors are then extra if they are still available. This is USED. Some wear on the Throttle Cable Guide/KIT, but spring works perfectly! ****THIS IS NOT A PLUG AND PLAY unit! You will NEED TO SET YOUR TPS (Throttle Position Sensor) with PROTUNE! Setting it manually is almost impossible-it is VERY SENSITIVE. TPS at closed throttle should be between 0.48 and 0.52 Volts, at WOT it should be around 4.75 Volts and it should also show 99%. READ your current TPS values BEFORE INSTALLING this and set it the same as your old one was!**** This came off a 2007 EFI Big Dog K-9, again, it is fully functional. This will work on ALL 2007 through 2011 Big Dog Fuel Injected models, K9, Bulldog, Bagger, Mastiff, Pitbull, etc... Diagram for informational purposes and reference ONLY! ONLY INCLUDES parts in PHOTO and listed BELOW. This listing includes the following already INSTALLED: 1-THROTTLE BODY3-THROTTLE BODY O-RING11-BACKING PLATE GASKET14/15-Throttle cable guide16/17/18-KIT, SENSOR, IDLE AIR CTRL, EFI, W/HDWR19/20/21-KIT, SENSOR, INTAKE AIR TEMP, IAT, W/HDWR22/23/24-KIT, SENSOR, TPS, VFI, W/HDWR AS IS! NO RETURNS! Questions? Ask BEFORE BUYING!!

Price: 500 USD

Location: Lehigh Acres, Florida

End Time: 2024-11-11T02:42:21.000Z

Shipping Cost: 14.95 USD