Ultrasonic Hardness Tester Ultrasonic Hardness Meter Gauge With Test Force 19.6N

Description: Ultrasonic Hardness Tester Ultrasonic Hardness Meter Gauge With Test Force 19.6N Characteristics:Directly test Vickers hardness value of workpiece, and there is no need to convert like Leeb or Shore hardness tester. The conversion error is eliminated.High test speed -- output test results within secondsStandard Vickers indentation, tiny indentation, little damage to the workpieceThe test results are related to the elastic constants of the workpiece. New workpiece needs to be calibrated according to the elastic constants.Small volume, light weight and easy to carry.Easy to test on assembly line.It can be used for testing on site and testing large workpiece and can be used to make hardness measurements on positions difficult to access, such as tooth ﬂanks or roots of gears.Only measuring the hardness condition of the surface contactedThe development of microcontroller technology makes it easy to calibrate workpiece with different elastic constants.Probe Specification:Probe:2kgf manual probeTest force:19.6NDiameter:22mmLength:150mmResonating rod diameter:2.4mmMaximum roughness of test surface:Ra<5μmMinimum workpiece weight:0.3kgMinimum workpiece thickness:2mmApplication:Ion nitriding die, formwork, fixture, thin-walled workpiece, bearing, tooth flanks, pipelineTechnical Specification：Main hardness scale: HV ;Convertible hardness scale: HRC, HRA, HRB, HBWIn multi-points calibration mode, any hardness scales can be chosen.Testing range: HV50~1599, HRC20~68, HB85~650Test direction：Support 360° test, as long as the angle between the indenter and the surface doesn’t exceed 90° ± 3°.Battery: 3.6V, 3000mAh lithium batteryEndurance: 10 hoursTest data can be exported to computer terminal.Norms: GB/T 34205-2017; DIN 50159-1-2008; ASTM-A1038-2005; JB/T 9377-2010; JJF 1436-2013.High accuracy----±4%HV, ±4%HB, ±1.5HR.Tiny test indentation---- requires a high-power microscope to see.Little damage to the workpiece.High test speed----output test results in 1s at the soonest.New appearance design, innovative sculpt, convenient to hold and good craft.Full English display, menu-type operation, few keys, simple and convenient to operate.3.5 inches large LCD screen with 320×480 color graphics dot matrix, beautiful font and graphics, rich information and clear display.Directly display the current measured value, cumulative measured value, maximum value, minimum value, average value and conversion value.50 sets of data storage.Simple calibration----5 sets of one-block calibration data, 1 set of default calibration data and 5 sets of multi-blockss calibration data can be stored in the host.For materials with different elastic constants, just an one-block calibration is required to adapt to the new material.For unknown material or material without conversion table, the hardness scale can be arbitrarily selected for multi-points calibration to eliminate the systematic error brought by the conversion table.Easy to test on assembly line.Operating Conditions:Temperature: -10℃~40℃;Humidity: ≤ 90%RH;No strong electromagnetic interferenceHost size: 170mm*70mm*20mm;Probe size: Ǿ22mm*150mm;Weight: 650gPacking List:Host;Manual probe;Probe connection cable;5V ac power adapter;USB cable;Standard hardness workpiece;Equipment case;Operating manual;CertificateApplication:Hardness test of flange edge and gear root stamping parts, mold, thin plate, face-hardened gear tooth, gear groove and taper partHardness test of axle and thin-wall pipes and vesselsHardness test of wheels and turbine rotorsHardness test of bit edgeHardness test of welding partsMeasure the depth of deep hole with certain aperture, concave and convex with large radians, and irregular planeHardness test of most ferrous and nonferrous metals and their alloys in industrial productionHardness test of thin coatings etc.Please note that the application scenarios are different according to different probes.

Price: 2115 USD

Location: HEFEI, ANHUI

End Time: 2025-02-11T03:45:30.000Z

Shipping Cost: 0 USD