Temperature Coolant Gauge MEP-802A MEP-803A 804A MEP-804B MEP-805A MEP 24 volt

Description: Click here to visit my eBay store, I double-dog dare you! This is an inexpensive alternative for a coolant temperature gauge for tactical quiet series of generators (GENERATOR, 5KW, 10KW, 15KW, 30KW, 60KW TQG, TACTICAL QUIET FAMILY) which include the MEP-802A, MEP-803A, MEP-804A, MEP-804B, MEP-805A, MEP-806A, and many others. The gauge in this listing is a Beede # 947886, it is physically the same size and look of the OEM gauge, it’s 24 volts, and is a drop in replacement for the OEM gauge. The face plate of the Beede # 947886 gauge is slightly different from the OEM gauge and the grounding screw on the OEM gauge is longer than the grounding screw on this replacement gauge. You will get exactly what is shown in the first four photos; you will need to re-use your nuts and gauge retaining bracket. The first four photos are of the gauge in this listing (new gauge). The fifth and sixth photos are used for comparison between the new gauge (gauge on the left) and the old gauge (gauge on the right). The seventh photo is of the old gauge mounted to the control panel. The eighth and ninth photos are of the new gauge mounted in the control panel of a MEP-805B generator. The tenth photo is of the new gauge in the generator just after start up, when the generator coolant is cold. The last two photos show the new gauge reading when the generator is up to normal operating temperature. I have used this gauge on a number of my generators and it works just fine. This replacement gauge will show that you’re running at about 200 degrees, which is slightly higher than the normal operating temp of 180 degrees, but the needle on both gauges is pointed in the exact same location on the face plate when running at operating temperature, which leads me to believe that the internal mechanism is either identical or nearly identical (just the face plate on the old and new gauge is different). The coolant temperature gauge is a common failure point for the TQG family of generators; here’s my story. I was running my MEP-804B, which had less than 75 hours on it since new, in temperatures averaging between -20 degrees and 5 degrees Fahrenheit. The generator would start fine, and run fine, but during the night it would shut off and show an overheat failure light in the morning. I checked everything in the entire cooling system and could not find anything wrong. Finally, I installed a new Beede 947886 temperature gauge and the generator performed flawlessly for the rest of the winter (about 600 hours). What this means for the lay person is that the coolant gauge is an integral part of the computer system, meaning you can’t simply install a mechanical gauge to fix the problem – you must install a working coolant temperature gauge similar or identical to the OEM gauge, so that the gauge sends the computer the correct signal and continues to run. I recommend keeping at least one extra of these gauges per Tactical Quiet Generator that you own as this is a common failure point in this system. Please click here to see my other items on eBay, including military diesel trucks and equipment, generators, and other surplus.

Price: 49.95 USD

Location: Sherwood, Wisconsin

End Time: 2024-07-28T18:06:44.000Z

Shipping Cost: 12 USD