Double Sided Tape Mounting Tape 2" x 18 Ft Heavy Duty Waterproof Black Foam T...

Description: Double Sided Tape Mounting Tape 2" x 18 Ft Heavy Duty Waterproof Black Foam Tape for Home Office Automotive Decorations Mountings G50mm PRODUCT FEATURES: very high bonding tape (" thick) is double coated pressure sensitive adhesive tapes for bonding a wide variety of substrates including lower surface energy materials and smooth surfaces, such power coated paints, glass, marble, plastic, tile, wood and lamination; but not good to heavy textured surfaces and painted walls (taken off paints while removal). Excellent temperature resistance, water moisture resistance, permanent bonding strength. APPLICATIONS: Super sticky strength can withstand moderate to heavy mounting with peel adhesion up to 20lb/in and tensile strength up to 90 lb/square inch as tested on stainless steel; is safe for smooth surfaces and widely used for LED strip lights, trims, car registration plates, name plates, plaques, signs, emblem, car holders, mosquito/bug screen, metal mailbox, mirrors, hangers, tooth brush holder, photo frames, power strip and other automotive home office decorations. PRETREATMENT GUIDELINES: For maximum bond strength, the surfaces should be thoroughly cleaned with a 50:50 mixture of isopropyl alcohol and water. Ideal tape application is accomplished when temperature is between 70° and 100°F (21° and 38°C) and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended. INSTALLATION: Clean and dry surface first, wipe with ADHESION PROMOTER (ASIN: B098747W2K) if some surface does not work well, apply the tape to objects (warm up the adhesive if weather is too cold) and let it cure for 12 hours then stick to the walls with pressure, "X" shape needed at center for big objects. The longer time applied the stronger the tape will be molding into surfaces of objects. HOW TO REMOVE: Remove the tape with adhesive remover, spray the adhesive remover around the bonding surface, scrap the tape and residue with plastic scrapper for a neat removal. Very High Bonding Double Sided Tape Industrial Grade 2 Sided Mounting Tape - Widely Used: Very high bonding tape works extremely well on smooth surfaces and widely used for LED strip lights, trims, car registration plates, name plates, plaques, signs, emblem, car holders, mosquito/bug screen, metal mailbox, mirrors, hangers, tooth brush holder, photo frames, power strip and other automotive home office decorations. This double sided mounting tape is an industrial grade Acrylic foam tape, more stable and better initial adhesion which is good for permanent and reliable installation indoor, particularly in exterior applications where extreme weather, moisture and adhesive is needed. The longer applied the stronger it will hold. Super sticky strength that can withstand moderate to heavy mounting with peel adhesion up to 20lb/in and tensile strength up to 90 lb/square inch as tested on stainless steel. Holding weight is based on objects with a maximum depth of ”. The PE film liner might be difficult to peel if you do not have nail; you can Use a knife to cut out the backing film a little bit or Pinch and stretch a corner of the adhesive until the backing liner lifts from the tape for easier liner removal. WARM THE ADHESIVE SIDE UP IN COLD WEATHER BY HAIR DRYER FOR BETTER INITIAL BONDING.

Price: 41.98 USD

Location: Davenport, Florida

End Time: 2024-11-13T18:17:41.000Z

Shipping Cost: 0 USD