Description: Product highlights4-channel car amplifier with digital signal processing 125 watts RMS x 4 at 4 ohms (200 watts RMS x 4 at 2 ohms) 400 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode) all controls and adjustments made with AudioControl Smart-User DSP app on your laptop (PC or Mac) via USB connection USB cable included variable high- and low-pass filters (20-20,000 Hz at 12 or 24 dB/octave) AccuBASS circuitry for improved bass response 30-band graphic EQ, parametric filters, phase correction time delay/alignment for inputs and outputs RTA (real-time analyzers) for inputs and outputs optiojnal ACR-3 remote controls level and recalls presets MILC™ (Maximum Input Level Control) LED optimization and clip indicators 6 speaker-level inputs (summable) GTO signal-sensing turn-on preamp inputs and outputs fuse rating: 40A x 2 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier dimensions: 8-7/8"W x 2"H x 7-3/4"D warranty: 5 years What's in the boxAmplifier 2.5 mm Allen wrench 119" USB cable (Type-A on one end / Micro-B on other end) Quick-start guide About this itemWritten by Crutchfield's Buck PomerantzAmplifier and DSP in one package Two keys to unlocking great sound in a car stereo system are serious power and extensive control — and this amp's got them both. For power, AudioControl's D-4.800 4-channel amplifier generates 125 watts RMS per channel, so it'll drive even the most demanding aftermarket speakers with plenty of headroom to spare. You could also bridge the D-4.800 to drive a couple subwoofers with 400 watts RMS each. Computer-controlled digital signal processing Smart-User DSP tuning software on a laptop (DM-810 version shown) You won't find any knobs on the D-4.800 — you make adjustments and save settings via your laptop (PC or Mac). AudioControl's Smart-User DSP software package includes 12 or 24 dB/octave Linkwitz-Riley crossovers, 30-band equalizers, parametric filters, time delay/alignment for inputs and outputs, phase correction, AccuBass™ bass correction, and real-time analyzers (RTA) for the inputs and outputs so you can visually confirm the improvements in the sound. It's made to work with a factory radio Six active speaker-level inputs allow you to connect this amp to almost any factory system, even ones that have separate pre-filtered, time-aligned, and amplified signals going to separate factory speakers and tweeters. The D-4.800 sums them into one smooth, unified signal for you to balance, align, and tune for your better-sounding aftermarket speakers. AudioControl's Great Turn On (GTO™) signal-sensing circuitry turns the amp on automatically whenever it senses an input, so you won't have to run a separate turn-on lead back to the receiver. Convenient features Onboard LEDs indicate optimized signal flow for inputs and outputs, plus give you a warning when a source is too loud and causing distortion. An optional ACR-3 wired remote controller lets you select sources, control levels, and recall presets from your front seat.
Price: 650.07 USD
Location: Charlottesville, Virginia
End Time: 2024-10-01T04:06:19.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
UPC: 855814005792
Type: All Car Amplifiers
MPN: D-4.800
Channels: 6
Brand: AudioControl
Model: D-4.800
