2018 & 2019 Ford FLEX PLUG'N Remote Starter Kit. SEE Photos & YouTube Video!

Description: Designed, Assembled & Installation Guide written by Professional Installers for the DIY Installer in the USA! 100% PLUG-IN INSTALLATIONWIRE-FREE, NO HARD-WIRING, CUTTING OR SPLICING 100% VEHICLE SPECIFIC READY JUST 2 KEYS ARE ALL THAT IS NEEDED TO PROGRAM THIS SYSTEM TO YOUR VEHICLE GO STRAIGHT FROM DELIVERY TO INSTALLATION! COMPLETE DETAILS CAN BE FOUND IN THE PHOTOS AND IN THE INFORMATION PROVIDED BELOW: SYSTEM DETAILS: NO computer, internet access, system updates, or special programmer needed: Just 2 keys to your vehicle is all that's required to program this system to your vehicle:TECH TIP PRECAUTION: Cannot use "CLONED" keys for programming: "Cloned" keys are replacement keys that did not require being programmed to your vehicle during purchase, access to your vehicle was not required to make the new "cloned" key. This restriction applies to any brand or model of remote starter system that requires 2 keys for programming. Works Using Your OEM RKE (Remote Keyless Entry) Remotes: Pressing LOCK 3 times (w/Horn beep) on your OEM remote will activate the remote starter OR, upon request, we can program it for you to activate by pressing the LOCK/UNLOCK/LOCK sequence (w/o Horn beep). Settings cannot be changed after installation. See photos for option details. TRUE Vehicle-Specific Factory Fit T-Harness: No wires or extra plugs to sort through that are left-over and not used, meant for other vehicles that you would need to tie up out of the way during installation. This provides an even easier-to-understand installation and a cleaner, more professional-looking install when finished. The connections on a MCR provided T-harness have just the plugs you use for your specific vehicle, nothing else. TRUE Vehicle Specific Step-by-Step Installation Guide: A clear & concise illustrated step-by-step installation guide that will walk you through every step of the installation. MCR provided manuals are not the generic factory manuals that show 6 different ways the system can be installed with different ways of programming. It indicates how it's exactly installed on just your specific vehicle only, nothing else. Cut out any possible confusion! Technical Support: Available by Phone, Email, Website, or MCR's YouTube Channel, and through eBay's "contact seller" link. LINK to YouTube Installation & Programming DEMO (Copy&Paste): youtu.be/0byyC0uFiQw 1-Year QC Limited Warranty: In the rare event that the system would fail due to a factory QC defect, MCA will directly repair or replace any part of the system within 1 year from date-of-delivery. Warranty assistance is not provided through eBay. Technical support provided RMA# required. Upgrades Ready & Compatible (sold separately): Upgrade anytime during or after installation with no system updates or special programmer necessary. Choose from Fortins RFK411 or RKF412 long-range remote kits or Smartphone control for unlimited range! See photos for option details. SYSTEM FEATURES AND BENEFITS:Multiple Run Times: 15 Minute Remote Start Run Time(default): The system will automatically shut down after 15 minutes OR you can shut it down sooner the same way you activated it with your remote. More or less run time is available upon request. Settings cannot be changed after installation. See photos for option details.Automatic HEAT/AC Activation: Just leave your climate control settings where you want them when parking the vehicle and the system will automatically turn them on within 10seconds after you activate the remote starter.2 Choices of Remote Start Activation:You can activate this system 1 of 2 ways, by pressing LOCK 3 times (w/Horn beep) on your OEM remote will activate the remote starter (default setting) OR, upon request, we can program it for you to activate it by pressing the LOCK/UNLOCK/LOCK sequence (w/o Horn beep). Settings cannot be changed after installation.See photos for option details.Brake Pedal Monitoring for Safety & Security: If you step on the brake pedal when the vehicle is running by the remote starter BEFORE the ignition is turned on with a key, the remote starter will immediately shut down and you will have to restart the vehicle with the key.Active Key-Takeover: The engine will not shut down when the driver's door is opened, so you won't have to restart the vehicle again with your key every time you remote started it.Components Made in Canada: By Fortin Automotive Electronics. One of the most established automotive aftermarket electronics manufacturers in the industry: Visit their website at: fortin.caVehicle Specifically Set-Up in Michigan: These are not "pull-it-off-the-shelf and ship it" systems. Using the manufacturer's computer software program, every system is QC bench tested, vehicle specifically programmed, then provided with a vehicle-specific plug-in T-harness before shipping.Limited 30-Day Returns: The system can be returned within 30 days from date-of-delivery, provided the system is in the exact same uninstalled delivery condition as received, including everything, manuals, internal & external packaging (shipped back in the same box as received). Due to the sensitivity of all automotive aftermarket electronics, any signs of attempt at installation will void the return option, only technical support and warranty coverage will be provided. VEHICLE COMPATIBILITY CONFIRMATION: 2018 & 2019 Ford FLEX Equipped with: Factory Remote Keyless Entry Automatic Transmission 2 Keys to Vehicle (Standard Bladed Ignition keys only, not "push-to-start" ignitions) GAS Engine ANYTHING WE DIDN'T COVER?PLEASE CONTACT US WITH ANY QUESTIONS YOU MAY HAVE BEFORE OR AFTER PURCHASE, WE HAVE BEEN INSTALLING FORTIN SYSTEMS FOR YEARS.

Price: 179.95 USD

Location: New Haven, Michigan

End Time: 2024-12-16T22:57:13.000Z

Shipping Cost: N/A USD